Comparing "intra operative" tissue engineering strategies for the repair of craniofacial bone defects.

BACKGROUND: In craniofacial reconstruction, the gold standard procedure for bone regeneration is the autologous bone graft (BG). However, this procedure requiring bone harvesting is a source of morbidity. Bone substitutes, such as biphasic calcium phosphate (BCP), represent an interesting alternative but are not sufficient for bone healing in hypoplastic conditions. In such conditions, osteoprogenitors are essential to provide osteoinduction. Previous studies have shown that BCP associated with total bone marrow (TBM) provides same bone reconstruction as bone graft in a rat model of calvaria defect. Furthermore, adipose tissue stromal vascular fraction (SVF) seems to be another promising source of osteoprogenitor cells that can be used intra-operatively. This study aimed to combine, intra-operative BCP-based bone tissue engineering strategies with TBM or SVF from human sources. METHODS: 5 mm critical-size calvaria defects were performed in 18 nude rat. The defects were filled with intra-operative bone tissue engineering procedures: human BG, human TBM + BCP, human SVF + BCP and, rat TBM + BCP. Animals were sacrificed 8 weeks after implantation and calvaria were processed for histological and radiological examinations. Implanted cells were labelled with a fluorochrome. RESULTS: Micro-CT analysis revealed partial repair of bone defect. Only hBG significantly succeeded in healing the defect (43.1%). However, low rate of newly formed bone tissue was observed in all tissue engineering conditions (hTBM, hSVF, ratTBM). DISCUSSION: The lack of bone formation observed in this study could possibly be attributed to the model. CONCLUSION: This study combined with a literature analysis show the stringency of the nude rat calvaria model in term of bone regeneration.

Biphasic calcium phosphate ceramics for bone reconstruction: A review of biological response.

Autologous bone graft is considered as the gold standard in bone reconstructive surgery. However, the quantity of bone available is limited and the harvesting procedure requires a second surgical site resulting in severe complications. Due to these limits, scientists and clinicians have considered alternatives to autologous bone graft. Calcium phosphates (CaPs) biomaterials including biphasic calcium phosphate (BCP) ceramics have proven efficacy in numerous clinical indications. Their specific physico-chemical properties (HA/TCP ratio, dual porosity and subsequent interconnected architecture) control (regulate/condition) the progressive resorption and the bone substitution process. By describing the most significant biological responses reported in the last 30years, we review the main events that made their clinical success. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine. STATEMENT OF SIGNIFICANCE: Nowadays, BCPs are definitely considered as the gold standard of bone substitutes in bone reconstructive surgery. Among the numerous clinical studies in literature demonstrating the performance of BCP, Passuti et al. and Randsford et al. studies largely contributed to the emergence of the BCPs. It could be interesting to come back to the main events that made their success and could explain their large adhesion from scientists to clinicians. This paper aims to review the most significant biological responses reported in the last 30years, of these BCP-based materials. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine.

Vascular imaging with contrast agent in hard and soft tissues using microcomputed-tomography.

Vascularization is essential for many tissues and is a main requisite for various tissue-engineering strategies. Different techniques are used for highlighting vasculature, in vivo and ex vivo, in 2-D or 3-D including histological staining, immunohistochemistry, radiography, angiography, microscopy, computed tomography (CT) or micro-CT, both stand-alone and synchrotron system. Vascularization can be studied with or without a contrast agent. This paper presents the results obtained with the latest Skyscan micro-CT (Skyscan 1272, Bruker, Belgium) following barium sulphate injection replacing the bloodstream in comparison with results obtained with a Skyscan In Vivo 1076. Different hard and soft tissues were perfused with contrast agent and were harvested. Samples were analysed using both forms of micro-CT, and improved results were shown using this new micro-CT. This study highlights the vasculature using micro-CT methods. The results obtained with the Skyscan 1272 are clearly defined compared to results obtained with Skyscan 1076. In particular, this instrument highlights the high number of small vessels, which were not seen before at lower resolution. This new micro-CT opens broader possibilities in detection and characterization of the 3-D vascular tree to assess vascular tissue engineering strategies.

Direct comparison of current cell-based and cell-free approaches towards the repair of craniofacial bone defects - A preclinical study.

For craniofacial bone defect repair, several alternatives to bone graft (BG) exist, including the combination of biphasic calcium phosphate (BCP) biomaterials with total bone marrow (TBM) and bone marrow-derived mesenchymal stromal cells (MSCs), or the use of growth factors like recombinant human bone morphogenic protein-2 (RhBMP-2) and various scaffolds. Therefore, clinicians might be unsure as to which approach will offer their patients the most benefit. Here, we aimed to compare different clinically relevant bone tissue engineering methods in an "all-in-one" study in rat calvarial defects. TBM, and MSCs committed or not, and cultured in two- or three-dimensions were mixed with BCP and implanted in bilateral parietal bone defects in rats. RhBMP-2 and BG were used as positive controls. After 7 weeks, significant de novo bone formation was observed in rhBMP-2 and BG groups, and in a lesser amount, when BCP biomaterials were mixed with TBM or committed MSCs cultured in three-dimensions. Due to the efficacy and safety of the TBM/BCP combination approach, we recommend this one-step procedure for further clinical investigation. STATEMENT OF SIGNIFICANCE: For craniofacial repair, total bone marrow (BM) and BM mesenchymal stem cell (MSC)-based regenerative medicine have shown to be promising in alternative to bone grafting (BG). Therefore, clinicians might be unsure as to which approach will offer the most benefit. Here, BM and MSCs committed or not were mixed with calcium phosphate ceramics (CaP) and implanted in bone defects in rats. RhBMP-2 and BG were used as positive controls. After 7 weeks, significant bone formation was observed in rhBMP-2 and BG groups, and when CaP were mixed with BM or committed MSCs. Since the BM-based procedure does not require bone harvest or cell culture, but provides de novo bone formation, we recommend consideration of this strategy for craniofacial applications.

Evaluation of new bone formation in irradiated areas using association of mesenchymal stem cells and total fresh bone marrow mixed with calcium phosphate scaffold.

The consequences of the treatment of the squamous cell carcinomas of the upper aerodigestive tract (bone removal and external radiation therapy) are constant. Tissue engineering using biphasic calcium phosphate (BCP) and mesenchymal stem cells (MSC) is considered as a promising alternative. We previously demonstrated the efficacy of BCP and total fresh bone marrow (TBM) in regenerating irradiated bone defect. The aim of this study was to know if adding MSC to BCP + TBM mixture could improve the bone formation in irradiated bone defects. Twenty-four Lewis 1A rats received a single dose of 20 Gy to the hind limbs. MSC were sampled from non-irradiated donors and amplified in proliferative, and a part in osteogenic, medium. 3 weeks after, defects were created on femurs and tibias, which were filled with BCP alone, BCP + TBM, BCP + TBM + uncommitted MSC, or BCP + TBM + committed MSC. 3 weeks after, samples were removed and prepared for qualitative and quantitative analysis. The rate of bone ingrowth was significantly higher after implantation of BCP + TBM mixture. The adding of a high concentration of MSC, committed or not, didn't improve the bone regeneration. The association BCP + TBM remains the most efficient material for bone substitution in irradiated areas.

An in vitro study of two GAG-like marine polysaccharides incorporated into injectable hydrogels for bone and cartilage tissue engineering.

Natural polysaccharides are attractive compounds with which to build scaffolds for bone and cartilage tissue engineering. Here we tested two non-standard ones, HE800 and GY785, for the two-dimensional (2-D) and three-dimensional (3-D) culture of osteoblasts (MC3T3-E1) and chondrocytes (C28/I2). These two glycosaminoglycan-like marine exopolysaccharides were incorporated into an injectable silylated hydroxypropylmethylcellulose-based hydrogel (Si-HPMC) that has already shown its suitability for bone and cartilage tissue engineering. Results showed that, similarly to hyaluronic acid (HA) (the control), HE800 and GY785 significantly improved the mechanical properties of the Si-HPMC hydrogel and induced the attachment of MC3T3-E1 and C28/I2 cells when these were cultured on top of the scaffolds. Si-HPMC hydrogel containing 0.67% HE800 exhibited the highest compressive modulus (11kPa) and allowed the best cell dispersion, especially of MC3T3-E1 cells. However, these cells did not survive when cultured in 3-D within hydrogels containing HE800, in contrast to C28/I2 cells. The latter proliferated in the microenvironment or concentrically depending on the nature of the hydrogel. Among all the constructs tested the Si-HPMC hydrogels containing 0.34% HE800 or 0.67% GY785 or 0.67% HA presented the most interesting features for cartilage tissue engineering applications, since they offered the highest compressive modulus (9.5-11kPa) while supporting the proliferation of chondrocytes.

Phosphate-dependent stimulation of MGP and OPN expression in osteoblasts via the ERK1/2 pathway is modulated by calcium.

Inorganic phosphate (Pi) acts as a signaling molecule in bone-forming cells, affecting cell functions and gene expression. Particularly, Pi stimulates the expression of mineralization-associated genes such as matrix gla protein (MGP) and osteopontin (OPN) through the ERK1/2 pathway. With respect to the presence of elevated extracellular calcium and Pi levels during bone remodeling, we questioned whether calcium might play a role in the Pi-dependent effects in osteoblasts. We first showed by Western blot and real-time PCR that the concomitant presence of 10 mM Pi and 1.8 mM calcium is required to stimulate ERK1/2 phosphorylation and MGP/OPN genes expression. The mechanisms involved in the cellular effects of calcium in the presence of Pi were subsequently examined. Firstly, the use of the calcium-sensing receptor (CaSR) agonist gadolinium and the G-protein inhibitor pertussis toxin enabled us to determine that a CaSR mechanism is not involved in the Pi and calcium mediated cellular effects. By transmission electron microscopy, we next demonstrated that adding 10mM Pi to the culture medium containing 1.8mM calcium led to the formation calcium phosphate precipitates (CaPp). Moreover, treatment of osteoblasts with exogenous pre-synthesized CaPp stimulated ERK1/2 phosphorylation and MGP/OPN genes expression. In spite of high extracellular calcium and Pi concentrations, this stimulation was blunted in the presence of phosphocitrate, an inhibitor of crystal formation. Finally, we showed that despite that CaPp are not endocytosed, their effect on ERK1/2 phosphorylation and MGP/OPN genes expression were dependent on lipid rafts integrity. In summary, we showed that calcium is required for Pi-dependent ERK1/2 phosphorylation and regulation of mineralization-associated genes in osteoblasts and that its effect could originate from extracellular-related effects of CaPp that are dependent on the integrity of lipid rafts.

Biofunctionality of MBCP ceramic granules (TricOs) plus fibrin sealant (Tisseel) versus MBCP ceramic granules as a filler of large periprosthetic bone defects: an investigative ovine study.

We aimed to quantify bone colonization toward an untreated titanium implant with primary stability following filling of the defect with micromacroporous biphasic calcium phosphate (MBCP) granules (TricOs) or MBCP granules mixed with fibrin sealant (Tisseel). Medial arthrotomy was performed on the knees of 20 sheep to create a bone defect (16 mm deep; 10 mm diameter), followed by anchorage of a titanium screw. Defects were filled with TricOs or TricOs-Tisseel granules, a perforated MBCP washer, a titanium washer and titanium screw. Sheep were euthanized at 3, 6, 12 and 26 weeks. From Week 12 onwards, the percentage of bone in contact with the 8 mm anchorage part of the screw increased in both groups, confirming its primary stability. At 26 weeks, whereas bone colonization was similar in both groups, biodegradation of ceramic was more rapid in the TricOs-Tisseel group (P = 0.0422). The centripetal nature of bone colonization was evident. Bone contact with the titanium implant surface was negligible. In conclusion, the use of a model that reproduces a large metaphyseal bone defect around a titanium implant with primary stability, filled with a mixture of either TricOs ceramic granules or TricOs granules mixed with Tisseel fibrin sealant, suggests that the addition of fibrin to TricOs enhances bone filling surgical technology.

Controlled release of bisphosphonate from a calcium phosphate biomaterial inhibits osteoclastic resorption in vitro.

Calcium phosphate biomaterials such as calcium deficient apatite (CDA) have been contemplated as carrier for delivery of bisphosphonate in bone tissues. In the present work, we have investigated the in vitro biological properties of Zoledronate-loaded CDA. CDA was loaded with zoledronate according to a previously described coating process. 31P MAS NMR spectra demonstrated the effective loading of zoledronate onto CDA. Using 14C labeled zoledronate, we then demonstrated the in vitro release of zoledronate from CDA. In a first set of experiments, we confirmed that Zoledronate reduced the number of TRAP-, vitronectin receptor-, and F-actin ring-positive cells as well as the resorption activity of osteoclasts obtained from a total rabbit bone cell culture. Interestingly, Zoledronate-loaded CDA and its extractive solutions decreased the osteoclastic resorption. Finally, zoledronate-loaded CDA did not affect the viability and alkaline phosphatase activity of primary osteoblastic cells. These data demonstrate that CDA is effective for loading and release of zoledronate. The released zoledronate inhibited osteoclastic resorption without affecting osteoblasts. Our findings therefore suggest that such a drug delivery system would allow an increase in the efficiency of bisphosphonates by being locally available. Further experiments are now required to evaluate the in vivo antiresorptive activity of this concept.

Bone growth in rapid prototyped porous titanium implants.

Two porous titanium implants with a pore size diameter of 800 and 1200 microm (Ti800 and Ti1200) and an interconnected network were manufactured using rapid prototyping. Their dimensions and structure matched those of the computer assisted design. The porosity of the implants was around 60%. Their compressive strength and Young's modulus were around 80 MPa and 2.7 GPa, respectively. These values are comparable to those of cortical bone. The implants were implanted bilaterally in the femoral epiphysis of 15 New Zealand White rabbits. After 3 and 8 weeks, abundant bone formation was found inside the rapid prototyped porous titanium implants. For the Ti1200 implants, bone ingrowth was (23.9 +/- 3.5)% and (10.3 +/- 2.8)%, respectively. A significant statistical difference (p < 0.05) was found for bone ingrowth in the Ti1200 between the two delays. The percentage of bone directly apposited on titanium was (35.8 +/- 5.4)% and (30.5 +/- 5.0)%. No significant difference was found for bone-implant contact between the different time periods and pore sizes. This work demonstrates that manufacturing macroporous titanium implants with controlled shape and porosity using a rapid prototyping method is possible and that this technique is a good candidate for orthopedic and maxillofacial applications.

[Experimental evaluation of microscan assessment of bone fusion]. / Etude expérimentale de la microtomographie X dans l'évaluation de la fusion osseuse.

PURPOSE OF THE STUDY: Certain confirmation of bone fusion remains difficult to obtain after arthrodesis despite progress in imaging techniques. Microscanning enables both qualitative and quantitative analysis of the bone microarchitecture. The purpose of this study was to evaluate this technique using a cervical arthrodesis with an intersomatic cage on an animal model and to validate results with histological analysis and electron scan microscopy (SEM). MATERIAL AND METHODS: C3-C4 discectomy was performed in 8 goats divided into two groups. In group 1 (3 animals), PEEK cages were inserted without bone graft. In group 2 (5 goats) the same cage was inserted and filled with an autologous iliac graft. The animals were sacrificed at six months. The instrumented levels were analyzed with a microscan. Histological slides were obtained and SEM performed. RESULTS: Nonunion was observed in the three animals with an empty cage (group 1) while only one animal in group 2 presented nonunion. Histology and SEM confirmed the diagnosis established with the microscan which also enabled a 3D analysis of the sample and study of the trabecular architecture of the intersomatic graft. DISCUSSION: The microscan enabled a micrometric analysis of the sample. This is the only technique enabling 3D analysis (slices can be obtained in the three planes for 3D reconstruction) for both qualitative and quantitative assessment. Analysis of the trabecular microstructure constitutes a major progress in evaluating the mechanical value of the fusion. The sample is not destroyed and can be studied further with other biomechanical techniques. CONCLUSION: Microscanning is an important technical advancement for the analysis of bone fusion. Future applications will undoubtedly be numerous (follow-up after arthrodesis, analysis of the mechanical quality of a graft). In vivo applications will probably be adapted soon.

Injectable bone substitute to preserve alveolar ridge resorption after tooth extraction: a study in dog.

The aim of the present study was to assess the efficacy of a ready-to-use injectable bone substitute on the prevention of alveolar ridge resorption after tooth extraction. Maxillary and mandibular premolars were extracted from 3 Beagle dogs with preservation of alveolar bone. Thereafter, distal sockets were filled with an injectable bone substitute (IBS), obtained by combining a polymer solution and granules of a biphasic calcium phosphate (BCP) ceramic. As a control, the mesial sockets were left unfilled. After a 3 months healing period, specimens were removed and prepared for histomorphometric evaluation with image analysis. Histomorphometric study allowed to measure the mean and the maximal heights of alveolar crest modifications. Results always showed an alveolar bone resorption in unfilled sockets. Resorption in filled maxillary sites was significantly lower than in control sites. Interestingly, an alveolar ridge augmentation was measured in mandibular filled sockets including 30% of newly-formed bone. It was concluded that an injectable bone substitute composed of a polymeric carrier and calcium phosphate can significantly increase alveolar ridge preservation after tooth extraction.

Initial presentation of childhood-onset systemic lupus erythematosus: a French multicenter study.

OBJECTIVE: To describe the clinical and laboratory manifestations of childhood-onset systemic lupus erythematosus (SLE) at presentation. STUDY DESIGN: This retrospective French multicenter study involved 155 patients in whom SLE developed before the age of 16 years. Mean patient age at onset was 11.5 +/- 2.5 years (range, 1.5-16 years). The female to male ratio was 4.5. RESULTS: The most common initial manifestations were hematologic (72%), cutaneous (70%), musculoskeletal (64%), renal (50%), and fever (58%). Thirty-two percent of children had atypical symptoms, mainly including abdominal involvement in 26 patients, which lead to negative laparotomy results for presumed appendicitis. Severe renal, neurologic, hematologic, abdominal, cardiac, pulmonary, thrombotic, and/or cutaneous manifestations occurred within the first month after the diagnosis in 40% of patients. The mean erythrocyte sedimentation rate was 72 +/- 29 mm/h, and the mean C-reactive protein value 22 +/- 21 mg/L. Antinuclear antibodies an, anti-double stranded DNA antibodies, and low C3 or C4 level were retrieved in 97%, 93%, and 78 % of patients, respectively. CONCLUSION: Initial manifestations of childhood-onset SLE are diverse and often severe. The diagnosis of SLE should be promptly considered in any febrile adolescent with unexplained organ involvement, especially when associated with an increased erythrocyte sedimentation rate.

Calcium phosphate drug delivery system: influence of local zoledronate release on bone implant osteointegration.

Despite total hip replacement (THR) gives generally satisfactory results, the quality of outcome in young patients is markedly decreased compared to the average THR outcome. For this population, pharmacological treatment with bisphosphonate would be beneficial to decrease the peri-implant osteolysis. However, as this population does not necessarily suffer from osteoporosis, a nonsystemic treatment would be preferable. Zoledronate was then grafted to hydroxyapatite (HA) coating of titanium implants. The implants were inserted in rat condyles with various zoledronate concentrations. A positive concentration-dependent effect was observed on the peri-implant bone density and on different histomorphometric parameters. Importantly for the outcome of the implants, the mechanical fixation was increased by the local presence of zoledronate. The obtained results open the way of an easy transformation of currently existing HA-coated implants by grafting bisphosphonate onto the coating in order to increase their service life in the patients.

Small-animal models for testing macroporous ceramic bone substitutes.

The aim of this study was to compare the bone colonization of a macroporous biphasic calcium phosphate (MBCP) ceramic in different sites (femur, tibia, and calvaria) in two animal species (rats and rabbits). A critical size defect model was used in all cases with implantation for 21 days. Bone colonization in the empty and MBCP-filled defects was measured with the use of backscattered electron microscopy (BSEM). In the empty cavities, bone healing remained on the edges, and did not bridge the critical size defects. Bone growth was observed in all the implantation sites in rats (approximately 13.6-36.6% of the total defect area, with ceramic ranging from 46.1 to 51.9%). The bone colonization appeared statistically higher in the femur of rabbits (48.5%) than in the tibia (12.6%) and calvaria (22.9%) sites. This slightly higher degree of bone healing was related to differences in the bone architecture of the implantation sites. Concerning the comparison between animal species, bone colonization appeared greater in rabbits than in rats for the femoral site (48.5% vs. 29.6%). For the other two sites (the tibia and calvaria), there was no statistically significant difference. The increased bone ingrowth observed in rabbit femurs might be due to the large bone surface area in contact with the MBCP ceramics. The femoral epiphysis of rabbits is therefore a favorable model for testing the bone-bonding capacity of materials, but a comparison with other implantation sites is subject to bias. This study shows that well-conducted and fully validated models with the use of small animals are essential in the development of new bone substitutes.

Development of an odontoblast in vitro model to study dentin mineralization.

The aim of the present work was to characterize the odontoblastic proliferation, differentiation, and matrix mineralization in culture of the recently established M2H4 rat cell line. Proliferation was assessed by cell counts, differentiation by RT-PCR analysis, and mineralization by alizarin red staining, atomic absorption spectrometry, and FTIR microspectroscopy. The results showed that M2H4 cell behavior closely mimics in vivo odontoblast differentiation, with, in particular, temporally regulated expression of DMP-1 and DSPP. Moreover, the mineral phase formed by M2H4 cells was similar to that in dentin from rat incisors. Finally, because in mice, transforming growth factor (TGF)-beta1 over-expression in vivo leads to an hypomineralization similar to that observed in dentinogenesis imperfecta type II, effects of TGF-beta1 on mineralization in M2H4 cell culture were studied. Treatment with TGF-beta1 dramatically reduced mineralization, whereas positive control treatment with bone morphogenetic protein-4 enhanced it, suggesting that M2H4 cell line is a promising tool to explore the mineralization mechanisms in physiopathologic conditions.

Phosphate is a specific signal for ATDC5 chondrocyte maturation and apoptosis-associated mineralization: possible implication of apoptosis in the regulation of endochondral ossification.

UNLABELLED: Involvement of Pi and Ca in chondrocyte maturation was studied because their levels increase in cartilage growth plate. In vitro results showed that Pi increases type X collagen expression, and together with Ca, induces apoptosis-associated mineralization, which is similar to that analyzed in vivo, thus suggesting a role for both ions and apoptosis during endochondral ossification. INTRODUCTION: During endochondral ossification, regulation of chondrocyte maturation governs the growth of the cartilage plate. The role of inorganic phosphate (Pi), whose levels strongly increase in the hypertrophic zone of the growth plate both in intra- and extracellular compartments, on chondrocyte maturation and mineralization of the extracellular matrix has not yet been deciphered. MATERIALS AND METHODS: The murine chondrogenic cell line ATDC5 was used. Various Pi and calcium concentrations were obtained by adding NaH2PO4/Na2HPO4 and CaCl2, respectively. Mineralization was investigated by measuring calcium content in cell layer by atomic absorption spectroscopy and by analyzing crystals with transmission electron microscopy and Fourier transform infrared microspectroscopy. Cell differentiation was investigated at the mRNA level (reverse transcriptase-polymerase chain reaction [RT-PCR] analysis). Cell viability was assessed by methyl tetrazolium salt (MTS) assay and staining with cell tracker green (CTG) and ethidium homodimer-(EthD-1). Apoptosis was evidenced by DNA fragmentation and caspase activation observed in confocal microscopy, as well as Bcl-2/Bax mRNA ratio (RT-PCR analysis). RESULTS: We showed that Pi increases expression of the hypertrophic marker, type X collagen. When calcium concentration is slightly increased (like in cartilage growth plate), Pi also induces matrix mineralization that seems identical to that observed in murine growth plate cartilage and stimulates apoptosis of differentiated ATDC5 cells, with a decrease in Bcl-2/Bax mRNA ratio, DNA fragmentation, characteristic morphological features, and caspase-3 activation. In addition, the use of a competitive inhibitor of phosphate transport showed that these effects are likely dependent on Pi entry into cells through phosphate transporters. Finally, inhibition of apoptosis with ZVAD-fmk reduces pi-induced mineralization. CONCLUSIONS: These findings suggest that Pi regulates chondrocyte maturation and apoptosis-associated mineralization, highlighting a possible role for Pi in the control of skeletal development.

Fourier transform infrared microspectroscopic investigation of the organic and mineral constituents of peritubular dentin: a horse study.

Peritubular dentin (PTD) is a relatively dense mineralized tissue surrounding tooth dentin tubules, whose composition and mode of formation are still unclear. Fourier transform infrared microspectroscopic studies of the organic and mineral components of the highly developed horse PTD indicate that the peritubular matrix is less abundant than the intertubular matrix but is also mainly composed of collagen, which is more hydrated. These data suggest that most of the crystals are located outside the collagen fibrils and probably not associated with protein components. The crystals in PTD have nearly the same crystallinity as those in intertubular spaces, showing comparable amounts of carbonate ions, although some PO4 groups have different nonapatitic environments. Horse PTD composition is very similar to that of ITD, with collagen as the main protein component and carbonated apatite as the mineral fraction but the different proportions of these constituents and the greater water content in PTD suggest a different organization.

Fourier transform infrared microspectroscopic investigation of the maturation of nonstoichiometric apatites in mineralized tissues: a horse dentin study.

Fourier transform infrared microspectroscopy (FTIRM) was used to study carbonated apatite/collagen interactions and maturation in horse secondary dentin. Unlike human dentin, this model contains no peritubular material around the odontoblastic processes and is thus quite similar to bone in composition, but not subject to tissue turnover. Crystals close to the mineralization front were very immature, showing high HPO(4) and very low CO(3) levels. Carbonate ions were located essentially in very labile, reactive environments, probably on the crystal surface. Removal of some of the HPO(4) ions from crystals during maturation was linked to an increase in total carbonate content. The CO(3) ions in labile environments decreased, probably after incorporation into more organized regions of the lattice. However, this increase of total carbonate content was associated with greater mineral crystallinity, confirming findings in other studies of synthetic apatite maturation in vitro. The good correlation between these results and those of in vitro experiments suggests that crystal maturation is essentially due to physicochemical processes and that the organic matrix controls only crystal size, multiplication, and/or organization.